bacnet - event-info
List currently active (non-normal) event states on a BACnet device.
Usage
iottack bacnet event-info --host <HOST> [OPTIONS]
Description
Retrieves the object list from the target device and checks the event-state
property (property ID 36) on each object. Any object in a non-Normal state is
reported with its object identifier, name, and state.
Equivalent to BACteria event_info().
Objects in Normal state or that do not support the event-state property are
silently skipped. The plugin reports:
- Whether event states were readable at all (always a High finding. Live alarm state is exposed without credentials).
- Any objects with non-Normal states (flagged High or Critical depending on severity).
Event state values
| Value | Name | Description |
|---|---|---|
| 0 | Normal | No active event |
| 1 | Fault | Reliability problem detected |
| 2 | Offnormal | Value outside normal range |
| 3 | High-Limit | Value above high limit |
| 4 | Low-Limit | Value below low limit |
| 5 | Life-Safety-Alarm | Life safety alarm condition |
Severity mapping
| Finding | Severity |
|---|---|
| Event states not readable | Info |
| Event states readable unauthenticated | High |
| Active Fault or Life-Safety-Alarm events | Critical |
| Other active events (Offnormal, High/Low-Limit) | High |
Options
| Flag | Short | Default | Description |
|---|---|---|---|
--host <HOST> | -H | (required) | Target BACnet/IP device |
--port <PORT> | -p | 47808 | BACnet/IP UDP port |
--timeout-ms <MS> | - | 5000 | Per-request timeout in milliseconds |
--max-objects <N> | - | 128 | Maximum objects to scan for event states |
--output <FILE> | -o | - | Save result to a file |
--format <FORMAT> | -f | text | text or json |
--verbose | -v | - | Increase log verbosity |
Example
$ iottack bacnet event-info --host 192.168.1.50
Plugin name: bacnet/event-info
Execution time: 18.40 s
Status: pass
Date: 2025-10-06 00:00:00 UTC
Event state readable on 12 objects at 192.168.1.50:47808 (10 normal, 2 active)
2 active events on 192.168.1.50:47808
Analog-Input:3 state=High-Limit (Chilled-Water-Return-Temp)
Binary-Input:1 state=Offnormal (Smoke-Detector-Zone-A)