logic-analyser device
List all sigrok-supported logic analyzers currently connected to the host, together with their full details: vendor, model, firmware version, serial number, connection ID, driver name, and the complete channel list.
Requirements
Same as logic-analyser capture. The
libsigrok system library must be installed and the user must have access to
USB/serial devices.
Plugin description
The plugin initialises a libsigrok context, iterates every registered driver,
and returns one Info finding per discovered device. Each finding includes:
- Vendor, model, firmware version
- Serial number and connection ID
- Driver short name and long name
- Number of channels and their names (disabled channels are marked)
No hardware interaction beyond device scanning takes place. The device is not opened and no samples are captured.
Usage
iottack logic-analyser device
Example output
One device found
$ iottack logic-analyser device
Plugin name: logic-analyser/device
Execution time: 284 ms
Status: pass
[INFO] 1 logic analyzer(s) detected
Use 'iottack logic-analyser capture --driver <DRIVER>' to start a capture.
[INFO] ACME Logic Pro (driver: fx2lafw)
Driver: fx2lafw (Cypress FX2 USB hardware logic analyzer)
Vendor: ACME
Model: Logic Pro
Version: 1.02
Serial: 00A1B2C3
Connection: 1.7
Channels: 8 — D0, D1, D2, D3, D4, D5, D6, D7
No devices found
$ iottack logic-analyser device
Plugin name: logic-analyser/device
Execution time: 112 ms
Status: pass
[INFO] No sigrok-supported logic analyzers found
No devices were detected. Connect a supported logic analyzer and retry,
or use 'iottack logic-analyser capture --driver demo' to test with a
simulated device.
Notes
- The
demodriver always appears because it requires no hardware. Useiottack logic-analyser capture --driver demoto test the capture plugin without a physical device. - Disabled channels are listed with a
(disabled)suffix. A channel may be disabled if the device was previously configured and the driver preserved that state. - To capture samples from a listed device pass its driver name to
iottack logic-analyser capture --driver <DRIVER>.