Plugins
Plugins extend iottack with individual test and enumeration capabilities.
Each plugin runs a self-contained check and reports zero or more findings with
a severity level and optional evidence string.
| Plugin | Command | Summary |
|---|---|---|
| amqp scan | iottack amqp scan | Detect an AMQP broker and test for default credentials |
| bacnet device-properties | iottack bacnet device-properties --host <HOST> | Read all standard Device-object properties |
| bacnet event-info | iottack bacnet event-info --host <HOST> | Read event and alarm state of a BACnet device |
| bacnet find-devices | iottack bacnet find-devices | Discover all reachable BACnet/IP devices via Who-Is broadcast |
| bacnet fuzz | iottack bacnet fuzz --host <HOST> | Send malformed BACnet PDUs and report anomalous responses |
| bacnet info | iottack bacnet info --host <HOST> | Read identification and status properties of a single BACnet/IP device |
| bacnet network-info | iottack bacnet network-info --host <HOST> | Read BACnet network configuration of a device |
| bacnet object-list | iottack bacnet object-list --host <HOST> | Enumerate all BACnet objects and read their present values |
| bacnet object-properties | iottack bacnet object-properties --host <HOST> --object <TYPE:ID> | Read all standard properties of a specific BACnet object |
| bacnet scan | iottack bacnet scan | Enumerate BACnet/IP devices and read key Device-object properties |
| bacnet services | iottack bacnet services --host <HOST> | Read supported BACnet services and object types |
| ble adapter | iottack ble adapter | List Bluetooth adapters and report their power and discoverability state |
| ble device | iottack ble device --address <ADDR> | Enumerate GATT services and characteristics of a single BLE device |
| ble scan | iottack ble scan | Discover nearby Bluetooth Low Energy devices and report their properties |
| ble write | iottack ble write --address <ADDR> --characteristic <UUID> | Write a value to a BLE GATT characteristic or fuzz it |
| can dump | iottack can dump | Passively capture CAN frames and report traffic statistics and security-relevant IDs |
| can enumerate | iottack can enumerate | Discover CAN bus devices via passive heartbeat, OBD-II broadcast, and CANopen node guarding |
| can scan | iottack can scan | Passively enumerate all active CAN IDs with frame count, rate, DLC, and payload |
| can send | iottack can send --id <HEX> | Transmit arbitrary CAN data frames (SFF or EFF) to the bus |
| ftdi device | iottack ftdi device | Enumerate FTDI USB adapters and report chip type, chip ID, EEPROM strings and MPSSE capability |
| http banner | iottack http banner | Checks HTTP banner and common settings |
| i2c read | iottack i2c read --address <HEX> | Read bytes from an I2C device register via an FTDI MPSSE adapter |
| i2c scan | iottack i2c scan | Probe all valid 7-bit I2C addresses via an FTDI MPSSE adapter |
| mcp2221 device | iottack mcp2221 device | Enumerate connected MCP2221/MCP2221A adapters and report USB identity and capabilities |
| modbus device-info | iottack modbus device-info | Read Modbus controller device identification (FC43 MEI) |
| modbus enumerate | iottack modbus enumerate | Enumerate Modbus coils, discrete inputs, and registers |
| modbus read-coils | iottack modbus read-coils | Read Modbus coils or discrete inputs |
| modbus read-registers | iottack modbus read-registers | Read Modbus holding or input registers |
| modbus write-coil | iottack modbus write-coil | Write a single Modbus coil (FC05) |
| modbus write-register | iottack modbus write-register | Write a value to one or more Modbus holding registers |
| mqtt | iottack mqtt | Work with MQTT |
| network mdns-scan | iottack network mdns-scan | Discover mDNS/DNS-SD services on the local network |
| network telnet | iottack network telnet | Connect to a Telnet service and detect banners, login prompts and default credentials |
| onewire scan | iottack onewire scan | Enumerate 1-Wire device ROM codes via FTDI UART loopback and report family type and security relevance |
| platform | iottack platform | Report details about the host/platform environment |
| tcp banner | iottack tcp banner | Connect to a TCP service and capture the initial banner, identifying the protocol and flagging cleartext services |
| tcp fuzz | iottack tcp fuzz | Send malformed and custom payloads to a TCP service and report anomalous responses |
| tcp shell-detect | iottack tcp shell-detect | Detect interactive shell or login prompt on a TCP service |
| uart baud-scan | iottack uart baud-scan | Probe common UART baud rates to identify the active configuration |
| uart fuzz | iottack uart fuzz | Send malformed and custom payloads to a UART interface and report anomalous responses |
| uart port-scan | iottack uart port-scan | Discover serial ports available on this host |
| uart shell-detect | iottack uart shell-detect | Detect interactive shell or login prompt on a UART interface |
| uart terminal | iottack uart terminal | Open an interactive terminal session over a UART interface |
| vulns bluefi | iottack vuln bluefi | Check ESP for CVE-2025-27840 |
| zigbee capture | iottack zigbee capture | Capture raw IEEE 802.15.4 frames |
| zigbee sniffer | iottack zigbee sniffer | Passively capture IEEE 802.15.4/Zigbee frames via nRF52840 dongle and report MAC-layer security weaknesses |
Global options
Every plugin accepts these flags in addition to its own arguments:
| Flag | Short | Description |
|---|---|---|
--verbose | -v | Increase log verbosity; repeat for more detail (-v, -vv, -vvv) |
--output <FILE> | -o | Save the result to a file |
--format <FORMAT> | -f | Output format for --output: text (default) or json |